Technology Case
Hot Products / Hot Sales
2016 - 09 - 25
Application Industry: communicationApplication Product: Digital Fiber-Optic CommunicationLayers:8Finish : ENIGMaterial: FR4Outer Track W/S: 4/4milInner Track W/S: 3.5/3.5milBoard Thickness: 1.6mmMin. ...
2016 - 09 - 25
Application Industry: Industrial ControlApplication Products: Function BoardLayer: 16Surface Finish: ENIGMaterial: High TG FR4Outer Track W/S: 4/4milInner Track W/S: 3.5/3.5milBoard Thickness: 2.43mmM...
Contact Us
联系我们
Tel: click here, contact us
Fax: click here, contact us
E-Mail: click here, contact us
Mobile: click here, contact us
Skype: click here, contact us
Address: 407, Kanglan Fortune Center, Fuzhou Avenue, Fuyong Street, Baoan District, Shenzhen, Guangdong 518103, China
Technics  Technics

To Be or Not To Be NSMD or SMD – that is the Question

 


  Two types of land patterns used for surface mount (SM) pads are non-solder mask defined or NSMD pads and solder mask defined or SMD pads. Fig. 1 shows the difference between the two.

 

  NSMD pads have the solder mask opening larger than the pads. On the other hands, SMD pads have the solder mask opening smaller than the copper pad.

 

  Most EMS providers suggest that NSMD be used because it provides tighter control of copper artwork registration compared to the positional tolerance of the solder masking process.

 

To Be or Not To Be NSMD or SMD – that is the Question

  Moreover, SMD pad definition may introduce stress concentration points that may result in solder joint cracking under extreme fatigue conditions.

 

  For NSMD, the pad size is typically reduced by 15 percent over the BGA diameter to achieve balanced stress on the solder joints. This method can also help to increase the routing channel on the primary layer.

 

  Here are more details to help you decide on whether to go NSMD or SMD in your designs.

 

  Using NSMD pad sizes for 0.4mm pitch BGA PCB design may provide favorable results at low volumes, but chances are low yields result at high-volume production runs.

 

  Keep in mind that ball size of 0.4mm pitch BGAs are smaller than those of 0.5mm pitch BGAs. Reducing pad size further may cause an insufficient solder-able area on the BGA pads. This can lead to PCBs being rejected at assembly inspection or latent failures in the field.


  Bridging can be created between pads when using NSMD pads for 0.4- and 0.3mm pitch BGAs. Bridging is created because there’s not enough solder mask webbing between pads.

 

  Since pad sizes are so small, and there is no solder mask webbing to provide adhesive strength, the pad may peel off, during reflow, or in the field.

 

  It's best to have no trace between two BGA pads. Having them introduces shorts at pitches of 0.4mm and smaller on external layers.

 

 

  On internal layers, there should be just one trace between pads. Also, PCB fabrication problems surface when running multiple and thin 2 to 3 mil traces between two BGA pads.

Case / 相关产品
回到顶部
深圳市汇和精密电路有限公司
Scan the QR code
to follow us 
Contact us
Copyright ©2019 Shenzhen Huihe Circuits Co.,Ltd.
犀牛云提供云计算服务
ADD :407, Kanglan Fortune Center, Fuzhou Avenue, Fuyong Street, Baoan District,  Shenzhen, Guangdong 518103, China

Fax:+86 0755-2788 8009
Post Code:330520
X
等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

展开
回到顶部